| |
|
|
 Optical Fibre Cables |
|
| RPG |
|
 |
Single mode/Multimode
Duct (unarmoured), Armoured ( Direct Buried) & Self Supporting Aerial construction.
Special construction for specialised applications viz steel wire armoured, FRP stranded ( rodent resistant, pultrusion equivalent).
Uni-tube & Multi-tube Construction.
2 Fibre upto 512 Fibre Cables
Low Halogen Sheath Cables.
Ribbon of Cables.
Metal Free Optic Fibre Cable (DUCT) - Uni Tube 2F upto 48F
Metal Free Optic Fibre Cable (DUCT) - Multi Tube 4F upto 216F
Optic Fibre Cable (Single Sheath) - Uni Tube Armoured 2F upto 48F
Optic Fibre Cable (Double Sheath) - Multi Tube Armoured 2F upto 216F
 www.rpgcables.com
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
| Optical Transmitters |
|
| Kabloptics - 1310nm |
|
 |
With ORTEL Laser module
With pre-Distrotion
Automatic AGC |
| |
|
| Gigalink - 1310nm |
|
 |
With Certified Original ORTEL Laser module
With pre-Distrotion & Automatic AGC |
|
| |
|
|
OmniStar® GX2 |
|
 |
• Highest average module density available in the industry
– 16 application modules in a 4 RU universal chassis for up
to 2.5X more density than other platforms
• Best 1310nm and 1550nm Performance Available
– Motorola’s traditional strength in 1310nm and integrating
Synchronous strong 1550nm products
• Intelligent platform
– Every module contains Motorola’s high-performance
PowerPC™ microcontroller enabling a highly integrated
design and smarter functionality |
 Product Brochure (pdf) |
|
| |
|
|
16-way EDFA |
|
 |
Features
Output powers of 16 x 16,5 dBm and 16 x 20 dBm
Cladding-pumped ErYb-doped fiber amplifier technology
Constant output power control
Input and output monitors
|
| Product Brochure (pdf) |
|
| |
|
|
Fx-ES10XL-100
|
|
 |
Features
Low noise, narrow linewidth CW-DFB laser
ITU-Grid wavelength
Wavelength adjustable +/- 100 GHz
Electrooptical modulator with 2 optical outputs
Automatic load control (ALC) for CATV signal input
Adjustable RF slope
> 2 x 10 dBm output power Fx-ES10XL-100)
|
| Product Brochure (pdf) |
|
| |
|
|
F x-OVxxxx
|
|
 |
Features
4 Erbium doped fiber amplifier technology
4 980 nm / 1480 nm pumplaser diode(s)
4 Constant gain or output power control
4 Input and output monitors
Optional measurement unit for SBS threshold of
succeeding fiberoptic links (SBS detection)
|
| Product Brochure (pdf) |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| Optical Receivers |
|
| Gigalink |
|
 |
With Chinese / Philips RF ICs
With Pin Diode/Module Fibre ICs
Optical Input Power +2 dBm to -5 dBm
Optical Input Connector SC/APC, FC/APC
Power Supply # Mains 230 V AC, 50 Hz
Power Pass 60 V AC to 30 V AC, 50Hz
RF Output Point 2 output, 1 Monitor (- 20 dB) |
| |
|
| |
|
| Motorola |
|
 |
Optical wavelength : 1310 (±20) to 1550 (±30) nm
Received optical input power range: –3 to +2 dBm
AC input voltage 44 to 90 VAC sine or square
AC bypass current 15 A
Hum modulation –65 dB @ 15 A bypass current
Operating temperature –40 °C to +60 °C (–40 °F to +140 °F)
Housing dimensions 16.13" L x 9.80" W x 5.68" D (40.9 x 24.8 x 14.4 cm)
Weight 21 lbs. (9.5 kgs) maximum
Forward passband frequency 47 to 870 MHz dependent upon split
Return passband 5 to 65 MHz dependent upon split
Flatness ±0.5 dB Fminfwd to Fmaxfwd
Return loss 16 dB
Output slope 6, 8, 10, 12.5, and 14 dB straight line slope
|
| |
|
|
Kabloptics |
|
 |
Optical Input Wavelength 1290nm to 1600nm
Optical Input Power +2 dBm to -5 dBm
Optical Input Connector SC
Power Supply
Mains 230 V AC, 50 Hz
Power Pass 60 V AC to 30 V AC, 50Hz
RF Output Point 2 output, 1 Monitor (- 20 dB) |
| |
|
| Tanna |
|
 |
Features:
It contains 3 hybrid ics, two for the rf and one for the optical to rf converter. .
It has 8 led indicator to give more accurate indication of optical power at the input.
Use of two doubler ics in the rf section to get minimum distortion in the o/p signal.
An additional attenuator is provided at the o/p of optical to rf converter to maintain the proper input level to the rf hybrid amp inside to avoid the overloading 0f the same & there by getting the optimum o/p level without distortion.
A high tech response equaliser along with an attenuator is provided to get better linearity at the o/p.
Choice of pin diode or hybrid ic for the optical to rf converter, depending on the model selected at the second rf o/p.
Choice of plugin type two way splitter or one way tap off at the o/p to get either equal or 10db level
Protection for the line powering is provided with the fuses & lightning arresters.
Model TE 94 - RF can be converted to regular RF amplifier with the help of internal jumpers in the field |
| |
|
| |
|
| |
|
| |
|
| |
|
| Optical Accessories |
|
|
Optical Splitters |
|
 |
With Connectors
Without Connectors
Optical Splitter Box Type
Bare Couplers(Steel tube Coupler) |
| |
|
| Optical PatchCords |
|
 |
SC / PC, SC / APC
FC/FC / ST/PC, ST/ST
FC/FC, PC/APC |
| |
|
| Optical Adaptors |
|
 |
FC/FC, SC/APC |
| |
|
| Tray |
|
 |
Small, Big, 6F/12F/24F
|
| |
|
| Joint Box |
|
 |
2-way, 3-way, 4-way, |
| |
|
| Patch Panel |
|
 |
Small, Big, 6F/12F/24F/48F/96F |
| |
|
| Joint Bottle |
|
 |
Small, Big, 6F/12F/24F/48F/96F |
| Product Brochure (pdf) |
|
| |
|
|
Fibre Management System |
|
 |
24 F/ 48 F/ 96 F |
| |
|
|
